MENSI 11.8” Long Propane Push Button Piezo Igniter Kit Gas Grill/Range/Heater/Stove Spaker Generator Ignition Set 2Pcs/Lot

Brand: MENSI

Color: Silver

Features:

• DIY kit suitable for all Propane & Natural Gas Gears but you may need do some modification during installation, It not fits all the current hole for install or the length of wire (if power is not enough you can use two）
• Output voltage: >=20kv,Sparking distance: 3-5mm, wire length 30cm, Electrode : M10*1 length: 57mm
• No battery needed just press, one press one spark but 𝐌𝐚𝐤𝐞 𝐬𝐮𝐫𝐞 𝐲𝐨𝐮 𝐜𝐨𝐧𝐧𝐞𝐜𝐭 𝐭𝐡𝐞 𝐠𝐫𝐨𝐮𝐝 𝐰𝐢𝐫𝐞 𝐨𝐫 𝐭𝐨𝐮𝐜𝐡 𝐠𝐫𝐨𝐮𝐝𝐢𝐧𝐠 𝐩𝐨𝐢𝐧𝐭𝐬. Life time: Over 30000times
• Installtion Tips: VERY IMPORTANT!!! - 𝐭𝐡𝐞 𝐩𝐢𝐞𝐳𝐨 𝐢𝐠𝐧𝐢𝐭𝐞𝐫 𝐡𝐚𝐬 𝐚 𝐬𝐢𝐥𝐯𝐞𝐫 𝐬𝐢𝐧𝐠𝐥𝐞 𝐥𝐢𝐧𝐞 𝐰𝐡𝐢𝐜𝐡 𝐚𝐜𝐭 𝐚𝐬 𝐠𝐫𝐨𝐮𝐧𝐝 𝐜𝐨𝐧𝐧𝐞𝐜𝐭𝐢𝐨𝐧 𝐩𝐨𝐢𝐧𝐭. you must tough that point to a metal control pannel or add some metal to get a singnal there so you can get it correct spark. Without Connect well, The igniter cannot ignite the burner because the spark will not come from the head of electrode pin
• Pin straight length: 19.5mm 135degree at head 9.0mm

Binding: Automotive

model number: SMT-DHQ003/DHZX016

Part Number: SMT-DHQ001/DHZ008

Details: MENSI push button Piezo igniter with threaded electrode ignition spark plug wire 30cm
electronic ignition devicebr> Specifition & data:br> Length: 9cmbr> Diameter: 2.6cmbr> Output voltage: >=18kvbr> Pressure:3.0±0.5kgbr> Applicable Gas: LPG, NGbr> Temperature-resistance: -20°C~120°Cbr> No battery just press, one press one spark.
Wire length: 30cm Pin straight length: 19.5mm 135degree at head 9.0mm Suitable all propane product ignition Lift time: around 30000times


This is a easy kit for propane appliance if your current model is manual ignition, you can do some hole of your plate and diy your product into a piezo ignition. It may not fit all current models and you need do some changed.

Attention: The piezo igniter nut should be conect a metal board of your grill or you need add a ground wire to let it work.

EAN: 0737123200160

Package Dimensions: 3.6 x 2.9 x 1.1 inches